Categorias
Los Mas Vendidos
Novedades
Viendo del 37 al 48 (de 2437 productos nuevos) Páginas de Resultados: [<< Anterior]   1  2  3  4  5 ...  [Siguiente >>] 
Zinger 16x8 Wood Propeller
These Zinger Wood Props are made of Lightweight Maple.All Zinger props are true pitch and have been balanced twice before shipping.The letter "W" after prop sizes denotes a wide-bladed prop.     FEATURES All Wood Props, have an airfoil cross section all the way to thetop and are test proven for high RPM.The Latest in Engineering Technology used for this Updated Design.Lower Noise and Accurate BalanceAvailable in a Wide Array of Sizes to Suit Every Application.Propeller is totally fuel-proof.   INCLUDES One 16x8 Wood Propeller   SPECIFICATIONS Center Hole Diameter: 3/16" approx.Propeller Diameter: 16"Propeller Pitch: 8"   REQUIREMENTS Depending on the engine crankshaft size, the propel...
  USD 15,00
Fecha Alta: miércoles 22 julio, 2015
Fabricante:

SDModels Pull-Pull Wire 8mm x 6000mm
SDModels Pull-Pull Wire 8mm x 6000mm ...
Fecha Alta: miércoles 08 julio, 2015
Fabricante:
  USD 4,00

SWB Pull-Pull Wire Connectors, 2 Pack
Description: This kit includes (2) 1 1/2" titanium turnbuckles, (2) RH #87 ball links and (2) wire adapters. Connect up to your bellcrank and you have up to a 1/2" of adjustment. These wire adapters provide a nice round connection for your wire rope, so there is no kinking....
  USD 20,00
Fecha Alta: martes 07 julio, 2015
Fabricante:

SWB 1.50" JR Split HD 4-40 Alum Half Arm
SWB’s the original aluminum Double-Loc Servo Arm. These arms are not only designed to clamp around the output shaft, but they also make up for any inconsistencies in the output shaft sizes.Half arms are measured from the servo screw hole to the outside hole.Full arms are measured from the servo screw hole to the outside hole.Hole spacing: 1" & 1-1/4" Half arms: .11 1-1/2" & 2' Half arms: .25 (1/4") 1-1/4", 1-1/2" and 2-1/4" Full arms: .25 (1/4") ...
Fecha Alta: martes 07 julio, 2015
Fabricante:
  USD 13,00

SWB 1" JR Split HD 4-40 Alum Half Arm
SWB’s the original aluminum Double-Loc Servo Arm. These arms are not only designed to clamp around the output shaft, but they also make up for any inconsistencies in the output shaft sizes.Half arms are measured from the servo screw hole to the outside hole.Full arms are measured from the servo screw hole to the outside hole.Hole spacing: 1" & 1-1/4" Half arms: .11 1-1/2" & 2' Half arms: .25 (1/4") 1-1/4", 1-1/2" and 2-1/4" Full arms: .25 (1/4") ...
  USD 11,00
Fecha Alta: martes 07 julio, 2015
Fabricante:

SDModels 3mm x 23mm Pull-Pull Couplers
3mm x 23mm Pull-Pull Couplers...
Fecha Alta: martes 07 julio, 2015
Fabricante:
  USD 2,00

Top Flite MonoKote Trim Solvent
Top Flite's Monokote Trim Solvent is the Secret to Super SmoothMonoKote-over-Monokote Bonding! Perfect for Either Large or Small Jobs.     FEATURES Easy to use, No Heat Required.Leaves a Mirror-Smooth Finish.No Sags, No Wrinkles, No Bubbles.Completely Fuelproof and Withstands Nitro Fuels as well as Gasoline.   INCLUDES One 4 oz Glass Bottle of MonoKote Trim Solvent   COMMENTS Harmful or fatal if swallowed. Vapor is harmful and combustible.Contains cyclohexanone, naptha, and gamma bytrol acetone. Do notuse or store near heat or flames. Use only in a well ventilatedarea. Avoid contact with eyes and prolonged contact with skin.If swallowed, give one or two glasses of water, and contactphysician immediately....
  USD 8,00
Fecha Alta: martes 07 julio, 2015
Fabricante: Top Flite

Align M0.6 Torque Tube Front Drive Gear Set/26T BLACK - 450 PRO
Product: Package: Instruction: Specification: Use for T-REX 450PRO 450PRO Front drive gear assembly x 2450PRO Short umbrella gear (26T) x 2450PRO Long umbrella gear x 2 ...
Fecha Alta: lunes 29 junio, 2015
Fabricante: Align
  USD 14,00

Align New 450 Feathering Shaft
Package: Instruction: Specification: Use for T-REX 450 Plus / Sport / Pro.●Must with:F4-8Thrust Bearing(H45R002XXW). ●Feathering shaft x 2●Washer x 4(Φ2.6xΦ5.8x0.6mm)●Socket screw-black x 4(M2.5x6mm) ...
  USD 7,00
Fecha Alta: lunes 29 junio, 2015
Fabricante: Align

Align Torque Tube Rear Drive Gear Set BLACK - 450 PRO
Product: Package: Instruction: Specification: Use for T-REX 450 Pro / 450 Sport / 450 DFC / 450L.Must with HS1298 450V3 Torque Tube Drive AssemblyH45038A Metal Tail Torque Tube UnitH45186 New Tail Torque Tube Unit Tail rotor shaft assembly x 2Long umbrella gear x 2 ...
Fecha Alta: lunes 29 junio, 2015
Fabricante: Align
  USD 14,00

Align 450 Autorotation Tail Drive Gear-Black
Package: Instruction: Specification: ●This new main gear is great for the balance. New super strength plastic-steel material, multinational patent design, light weight, and special cooling blade design is good for lowering the temperature of electronic equipment and motors. It can efficiently increase the wind flow.●Use for T-REX 450 series. ●Autorotation tail drive gear-Black(106T) x 1●Weight:8.5g/pcs ...
  USD 6,00
Fecha Alta: lunes 29 junio, 2015
Fabricante: Align

Align 450DFC Linkage Rod Set - 2.0mm V2 System
Product: Illustration: Package: Instruction: Specification: The ball link are manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.Use for T-REX 450DFC(H45162/45162QN). Must use with H45165A - will not work with older Trex 250 DFC systems. For older Trex 250 DFC systems, please use part number H45182. 450DFC Linkage rod A × 4450DFC Ball link × 4 ...
Fecha Alta: lunes 29 junio, 2015
Fabricante: Align
  USD 7,00

Viendo del 37 al 48 (de 2437 productos nuevos) Páginas de Resultados: [<< Anterior]   1  2  3  4  5 ...  [Siguiente >>] 
Novedades
Hobbico LiFe 6.6V 1100mAh 10C Receiver U
Hobbico LiFe 6.6V 1100mAh 10C Receiver U
This is the Hobbico LiFe 6.6V 1100mAh 10C Receiver ...
Precio:USD 32,00
Comentarios
King Tech K-140G
amigo que precio tiene , es treinta y dos mil cuatrocientos o por favor corrija me ???...
5 de 5 Estrellas!
King Tech K-140G