Advertencia Advertencia: Puedo escribir en el fichero de configuración: /home/xc30oakvzf59/public_html/includes/configure.php. En determinadas circunstancias esto puede suponer un riesgo - por favor corriga los permisos de este fichero.
NotificacionesNotifiqueme de cambios a POWERBOX Voltage Regulator 5.3 Volt
Inicio » Catálogo » RADIOS & ELECTRONICAS » Reguladores de Voltage » PBX-5509 » POWERBOX Voltage Regulator 5.3 Volt
USD 37,00
POWERBOX Voltage Regulator 5.3 Volt

PowerBox  Voltage Regulator - 5.3 volt

Great little linear regulator for 5.3 volt applications.

Good to 5 amps.

Light weight (0.4 oz)and small size make it a great choice for in-line applications.

Voltage Regulator (linear)

The voltage regulator is designed to prevent excessive voltages reaching receivers and servos, and is a compact, lightweight device with an excellent performance.

The unit enables the modeller to use modern Lithium-Polymer and LiFe batteries (two-cell 8.4 V packs) in models. It can also be used to limit the excess voltage of a five-cell NC battery.

Any servo feedback currents which may arise are reliably absorbed by an electrolytic capacitor of generous capacity.

Since the voltage regulator is so light (just 12.0 grammes), it can be fitted to any small to medium-sized model aircraft without increasing the airframe weight significantly.

The unit is fitted with Uni, JR or Futaba connectors, as fitted to your battery. The connector is polarised: centre positive, both outer pins negative.

Connecting the battery offset to one side will instantly ruin the regulator.

The connecting lead attached to the voltage regulator can be plugged directly into the receiver socket.

If you wish to use a switch in the power supply circuit, we recommend that you fit it between the voltage regulator and the batteries.

Of course, the voltage regulator can also be used to complement other devices. For example, it is feasible to connect it to our switch backer or other non-regulated backer if you wish to use Lithium cells. The regulator can supply 3 - 5 Ampere (according to cooling efficiency), and this level of performance makes it suitable for use in models fitted with 6 - 8 standard servos or 5 - 6 digital servos.

Since any voltage regulating device generates waste heat (varying according to current drain), the unit must always be housed in an open position in the model, i.e. not enclosed.

The regulator is completely encapsulated using a modern "hot melt" process, with the result that it is totally protected from vibration and damp of all kinds.


Weight:  12.0 grammes

Voltage range:  4.0 - 9.0 Volts

Regulated voltage:    5.3 Volts

Performance:  regulated 2.0 - 5.0 A according to cooling; peak (brief) 10 A

Regulator losses:  0.14 Volts

USD 37,00

Este producto esta en nuestro catálogo desde jueves 07 mayo, 2015.
Zap Z-Poxy 30-Minute 8 oz
Zap Z-Poxy 30-Minute 8 oz
Pacer's 30 Minute Z-Poxy is Resistant to Shock and ...
Precio:USD 19,00
Escribir Comentario Escriba un comentario para este producto