Advertencia Advertencia: Puedo escribir en el fichero de configuración: /home/xc30oakvzf59/public_html/includes/configure.php. En determinadas circunstancias esto puede suponer un riesgo - por favor corriga los permisos de este fichero.
Categorias
Notificaciones
NotificacionesNotifiqueme de cambios a Scorpion Motor Bearing Lubrication Kit
Inicio » Catálogo » LUBRICANTE & PEGAMENTO » Lubricantes » OilKit » Scorpion Motor Bearing Lubrication Kit
[OilKit]
USD 6,00
Scorpion Motor Bearing Lubrication Kit
Product Details

Scorpion recommends oiling motor bearings every 10 to 12 flights!

To keep your brushless motor operating at maximum performance, it is important that the bearings in your motor be properly maintained. This is especially true of helicopter motors that often spin in excess of 45,000 RPM. In an average flight, the motor in a 450 size helicopter spins around almost a quarter million times! Without proper lubrication, the balls in the bearings can wear out quickly, leading to premature failure.

We have put together a motor bearing lubrication kit to help extend the life of the bearings in your Scorpion brushless motor. This kit contains a 25cc bottle of bearing lubricant and two needle point applicator nozzles. One nozzle is 1" long, and will work with the 22mm and 30mm motors, and the other nozzle is 1.5" long to use with 40mm and larger motors.

The oil included in the kit is a special product that actually bonds to the metal parts, and resists being thrown out by the high speed and centrifugal forces inside the bearings. A small drop placed on each bearing about once every 10 flights is enough to maintain proper lubrication to insure the longest possible life for your motor bearings.

The oil is safe for use on Acrylics, Polyester, Nylon, Vinyl, Delrin, Teflon, Formica, Polyethylene and Polypropylene. It is also safe on most painted surfaces.

There is no visible effect on Buna-N, Viton or Neoprene rubber products, so it is safe around most fuel lines, o-rings and other rubber products.



USD 6,00

Este producto esta en nuestro catálogo desde martes 05 octubre, 2010.
Comentarios
Clientes que compraron este producto, también han comprado
Align 325mm 325D Carbon Fiber Blades HD320A - Trex450
Align 325mm 325D Carbon Fiber Blades HD320A - Trex450
APC 6x4 Sport Gas Propeller
APC  6x4 Sport Gas Propeller
Align Main Shaft Spacer H50157 T-Rex 500E PRO
Align Main Shaft Spacer H50157 T-Rex 500E PRO
GP Fuel Line Clamp Medium 3/32" (4)
GP Fuel Line Clamp Medium 3/32" (4)
JR 6-inch Servo Extension
JR  6-inch Servo Extension
GP Fuel Line Clamp Large 1/8" (4)
GP Fuel Line Clamp Large 1/8" (4)
Novedades
Zap Z-Poxy 30-Minute 8 oz
Zap Z-Poxy 30-Minute 8 oz
Pacer's 30 Minute Z-Poxy is Resistant to Shock and ...
Precio:USD 19,00
Comentarios
Escribir Comentario Escriba un comentario para este producto